37
Bookmarking frequently connected Nodes or Rooms
When you save (bookmark) node stations and rooms, they are displayed in the group window, so you can easily access
them.
Bookmarking Nodes or Rooms
1.
Click on the node station or room you want to bookmark
in “Active node window” or “Active room window”.
2.
Right-click the selected “Node” or “Room” to display the
command list.
3.
Click the [Add to Bookmark].
Operating the transceiver in Portable HRI Mode
You can make settings such as transceiver screen display in use in Portable HRI Mode and turning off the TX/BUSY
lamp.
FT2D
function key
Switching between Access Point and Direct Operation Press the A/B key
BACKTRACK screeen (compass screen) Press the DISP key (Direct Operation only)
Transmission sound monitor function on or off Press the V/M key (Direct Operation only)
SQL open Press the MONI key
SQL level setting Press the SQL key
Switching TX/RX LED on or off Press and hold the V/M key
Dimmer setting Press the BAND key
Lamp setting Press and hold DISP key
Change of the busy detection (noise squelch/DG - ID
number match)
Press and hold the A/B key
To Next Page
Loading...
Need help?
General