4-17
GB
2) Adjust the throttle stop-screw to set
the idling speed to specification (see
“SPECIFICATIONS”) by turning the
stop-screw clockwise to increase the
idling speed, and turning it counter-
clockwise to decrease the idling
speed.
NOTE:
Correct idling-speed adjustment is only
possible if the engine is fully warmed-up.
If not warmed up fully, the speed setting
will tend to be too high.
If you have difficulty obtaining the speci-
fied idle, consult a Yamaha dealer or
other qualified mechanic.
1 Throttle stop-screw
213021
q
w
EMK56010
CHECKING WATER TRAP UNDER
ENGINE OIL TANK
There is a trap at the bottom of the engine
oil tank. If water or foreign matter is visi-
ble in this trap, consult a Yamaha dealer.
1 Trap
2 Engine oil tank
64C-9-76 (E,F,ES) 4C 4/25/0 3:10 PM Page 160
To Next Page
Loading...
Need help?
General
