E
3-9
EMF43510
Engine
8 Check the engine and engine mount-
ing.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
cC
Do not start the engine out of water.
Overheating and serious engine damage
can occur.
EMF50012
BREAKING IN (RUNNING IN)
ENGINE
Your new engine requires a period of
break-in (running-in) to allow mating sur-
faces of moving parts to wear-in evenly.
Correct break-in (running-in) will help
ensure proper performance and longer
engine life.
cC
Failure to follow the break-in (running-in)
procedure may result in reduced engine
life or even severe engine damage.
Break-in (running-in) time: 10 hours
Break-in (running-in) premix ratio:
Refer to “Gasoline/Petrol and Oil
Mixing”.
6A1-9-1L 3 4/20/01 11:59 AM Page 10
To Next Page
Loading...
Need help?
General
