Trouble Recovery
106
careful not to twist the water detec-
tion switch lead when screwing the fil-
ter cup onto the filter housing.
[ECM01971]
7. Connect the water detection switch cou-
pler securely until a click is heard.
8. Install the top cowling.
9. Turn the main switch to the “ ” (on) po-
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
arator-alert indicator blinks or the buzzer
sounds, have your Yamaha dealer check
the outboard motor. NOTICE: Although
the buzzer will stop when the engine is
started and the control lever is moved
to the forward or reverse position, do
not use the outboard motor. Other-
wise, serious engine damage could
occur.
[ECM02481]
EMU33502
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
[ECM00402]
1. O-ring
2. Filter cup
3. Water detection switch lead
U6DV37E0.book Page 106 Monday, December 10, 2018 4:07 PM
©2020 Yamaha Motor Corporation
To Next Page
Loading...
Need help?
General
