Yamaha F200 User Manual

Components
34
EMU41553
Main switch
The main switch controls the ignition system;
its operation is described below.
 “” (off)
With the main switch in the “ ” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
 “” (on)
With the main switch in the “ ” (on) position,
the electrical circuits are on, and the key can-
not be removed. The engine can be started
by pressing the Start/Stop button.
 “” (start)
With the main switch in the “ ” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “ ” (on) position.
EMU41622
Start/Stop switch panel
The engine can be started or turned off by
pressing the Start/Stop button. For twin type,
it is possible to start or turn off individual en-
gine. The indicator for the corresponding en-
gine will come on.
 PORT:Port side engine
 STBD:Starboard side engine
EMU41632
All Start/Stop switch panel
The Start/Stop button allows all engines to
start or turn off.
EMU35154
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch “ ” (up) trims the
outboard motor up, and then tilts it up. Press-
ON
OFF
ZMU07145
START
ON
OFF
ZMU07146
1. Indicator
2. Start/Stop button
1. All Start/Stop button
1
2
ZMU07174
1
ZMU07176
U6DV37E0.book Page 34 Monday, December 10, 2018 4:07 PM
©2020 Yamaha Motor Corporation

Yamaha F200 Specifications

General

Brand	Yamaha
Model	F200
Category	Outboard Motor
Language	English