Effects
32
The Chorus effect lets you enhance the sound of the voices with the use of pitch
modulation. Two basic types are provided: Chorus and Flanger. Chorus produces
a thicker, warmer, and more animated sound, whereas Flanger creates a swirling,
metallic effect. A total of four Chorus types are available. (See page 34.)
The following par
ameters can be set in the Function mode (pages 75, 76).
The DSP effect section provides distortion and chorus effects, plus a wealth of
other useful and dynamic effects for enhancing and changing the sound of the
voices. Included among these miscellaneous effects are reverse gate reverb,
phaser, rotary speaker, tremolo, echo, delay, distortion, equalization, and wah. A
total of thirty-eight DSP types are available. (See page 34.)
The following par
ameters can be set in the Function mode (pages 75, 76).
CATEGORY SELECT
Effect Chorus Type
Main Voice Chorus Send Level
Dual Voice Chorus Send Level
Split Voice Chorus Send Level
CATEGORY SELECT
Effect DSP Type
Main Voice DSP Send Level
Dual Voice DSP Send Level
Split Voice DSP Send Level
Chorus
DSP
• Each voice of the PSR-290 has
its own independent DSP setting.
• Fifty-one additional DSP Types
are available when controlling the
PSR-290 from a MIDI device.
(For details, see page 92.)
To Next Page
Loading...
Need help?
General
