Selecting and Playing Songs
54
The convenient A-B Repeat function is an ideal aid for practicing and learning. It
allows you to specify a phrase of a song (between point A and point B) and repeat
it — while you play or practice along with it.
1 While playing a song, set point A (the start point).
During playback, press the [A-B REPEAT] button once, at the beginning
point to be repeated.
2 Set point B (the end point).
As the song continues playing, press the [A-B REPEAT] button once again,
at the ending point to be repeated. The selected phrase repeats indefinitely
until stopped.
3 Pause or stop playback as needed.
Use the [PAUSE] button or [START/STOP] button. Stopping playback does
not cancel the set A/B points or the A-B Repeat function.
4 Turn off the A-B Repeat function.
Press the [A-B REPEAT] button.
A-B Repeat
A-
REPEAT
006
006
• The A and B points can only be
specified at the beginning of a
measure (beat 1), and not at any
point in the middle of a measure.
• To set the A point to the begin-
ning of a song, press the [A-B
REPEAT] button before starting
playback.
• If you’re repeat practicing a par-
ticularly difficult section, try slow-
ing down the Tempo to an
appropriate speed to make it eas
ier to play and master the part.
You may also want to slow down
the Tempo while setting the A
and B points; this makes it easier
to accurately set the points.
• You can also set the A-B Repeat
function when the song is
stopped. Simply use the [REW
r
] and [FF
f
] buttons to select
the desired measures, pressing
the [A-B REPEAT] button for
each point, then start playback.
A-b
REPEAT
012
012
To Next Page
Loading...
Need help?
General
