Portable Grand
21
3
Turn on the Metronome.
Press the [METRONOME] button.
To turn the Metronome off, press the [METRONOME] button again.
Indicates the beat number
in the measure.
Setting the Metronome Time Signature
The time signature of the Metronome can be set to var-
ious quarter-note based meters.
Hold down the [METRONOME] button (until “TIME
SIG” appears in the display), then press the button on
the numeric keypad that corresponds to the desired
time signature (see chart at right).
• The time signature changes automatically when a style or song is
selected.
Numeric
keypad
Time signature
1 1/4 — Plays only “1” beats (all high clicks)
2 2/4
3 3/4
4 4/4
5 5/4
6 6/4
7 7/4
8 8/4
9 9/4
0 Plays no “1” beats (all low clicks)
Indicates current beat number
TIME SIG
2
Adjusting the Metronome Volume
You can adjust the volume of the Metronome sound independently of the other PSR-GX76 sounds. The volume
range is 000 - 127.
1 Call up the Metronome Volume setting.
Press the right Overall button until “MTR VOL” appears in the display.
2 Change the value.
Use the numeric keypad to set the desired Metronome Volume value, or use the
[+]/[-] buttons to increase or decrease the value.
Indicates Metronome
Volume is selected
Current Metronome Volume value
MTR VOL
100
Restoring the Default Met-
ronome Volume Value
To restore the default Metro-
nome Volume value (100),
press both [+]/[-] buttons
simultaneously (when Metro-
nome Volume is selected in
the Overall menu).
To Next Page
Loading...
Need help?
General
