Song Recording
58
Song Clear
The Song Clear operation completely erases all recorded data on all tracks of a
selected User song. Use this operation only when you’re sure you want to erase a
song and record a new one. To erase an individual track of a song while leaving
the other tracks intact, use the Track Clear operation (page 59).
1 Select the desired song.
Press the [SONG] button, then use the numeric keypad or [+]/[-] buttons to
select the desired song (101 - 105).
2 While holding down the [A] button, press SONG MEMORY
button [1].
All track indications in the display flash, indicating that all tracks are to be
erased.
3 Press the [+/YES] button.
4 At the “Sure?” prompt, press the [+/YES] button, or press
the [-/NO] button to abort.
Pressing the [+/YES] button executes the Song Clear operation.
Pressing the [-/NO] button aborts.
• Songs 001 - 100 cannot be
selected for this operation.
User 2
102
ClrUser2
YES
Sure ?
YES
To Next Page
Loading...
Need help?
General
