4-16
E
EJU13261
Lubrication points
To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
Recommended water-resistant grease:
Yamaha Marine Grease/
Yamaha Grease A
●
Throttle cable (carburetor end)
●
Oil pump cable
●
Choke cable (carburetor end)
●
Throttle cable (handlebar end)
Squeeze the throttle lever and remove the
seal 1. Spray a rust inhibitor into the
outer cable. Refit the seal securely.
●
Steering cable (handlebar end)
UGU513.book Page 16 Tuesday, June 10, 2003 12:21 PM
To Next Page
Loading...
Need help?
General