3-5
INSTRUMENT AND CONTROL FUNCTIONS
3
NOTE:
After resetting the fuel reserve trip-
meter, the display will return to
“TRIP 1”, unless a different mode had
been previously selected; in that
case, the display automatically
returns to the prior mode.
Fuel gauge
The fuel gauge indicates the amount
of fuel in the fuel tank. The display
segments of the fuel gauge disap-
pear towards “E” (Empty) as the fuel
level decreases. When only one seg-
ment is left near “E”, refuel as soon
as possible.
Self-diagnosis device
This model is equipped with a self-
diagnosis device for various electrical
circuits.
If any of those circuits are defective,
the odometer/tripmeter will indicate a
two-digit error code (e.g., 11, 12, 13).
If the odometer/tripmeter indicates
such an error code, note the code
number, and then have a Yamaha
dealer check the motorcycle.
ECA00120
cC
If the odometer/tripmeter indicates
an error code, the motorcycle
should be checked as soon as
possible in order to avoid engine
damage.
EAU04938
Tachometer unit
Tachometer unit
The electric tachometer allows the
rider to monitor the engine speed and
keep it within the ideal power range.
When the key is turned to “ON”, the
tachometer needle will move to
9,500 r/min and back to zero r/min in
order to test the electrical circuit.
1. Tachometer
2. Tachometer red zone
3. Clock
5PS-28199-E1 8/29/02 9:16 AM Page 18
To Next Page
Loading...
Need help?
General
