Yamaha TDM900 User Manual

6-23
PERIODIC MAINTENANCE AND MINOR REPAIR
6
3. If the specified clutch lever free
play could be obtained as
described above, tighten the
locknut and skip the rest of the
procedure, otherwise proceed as
follows.
4. Fully turn the adjusting bolt at the
clutch lever in direction a to
loosen the clutch cable.
1
a
2
a
1. Locknut (clutch lever)
2. Clutch lever free play adjusting bolt
EAU00712
Adjusting the brake pedal
position
Brake pedal position, adjusting
The top of the brake pedal should be
positioned approximately 32 mm
below the top of the footrest as
shown. Periodically check the brake
pedal position and, if necessary,
have a Yamaha dealer adjust it.
a. Distance between brake pedal and footrest
5. Loosen the locknut at the
crankcase.
6. To increase the clutch lever free
play, turn the adjusting nut in
direction a. To decrease the
clutch lever free play, turn the
adjusting nut in direction b.
7. Tighten the locknut at the clutch
lever and the crankcase.
1
2
b
a
1. Locknut (crankcase)
2. Clutch lever free play adjusting nut
5PS-28199-E1 8/29/02 9:16 AM Page 68

Yamaha TDM900 Specifications

General

Brand	Yamaha
Model	TDM900
Category	Motorcycle
Language	English