Yamaha YZ250 2021 - Front Wheel; Installing the Front Wheel; Removing the Front Wheel

FRONT WHEEL
4-2
EAM20095
FRONT WHEEL
EAM30017
REMOVING THE FRONT WHEEL
1. Use a maintenance stand to raise the front
wheel off the ground.
WARNING
EWA13120
Securely support the vehicle so that there is
no danger of it falling over.
2. Remove:
• Front wheel
EAM30617
INSTALLING THE FRONT WHEEL
1. Install:
• Front wheel
TIP
Install the brake disc “1” between the brake pads
“2” correctly.
2. Install:
• Front wheel axle “1”
TIP
Apply the lithium-soap-based grease to the front
wheel axle.
3. Tighten:
• Front wheel axle nut “1”
NOTICE
ECA24430
Before tightening the front wheel axle nut,
push down hard on the handlebar(s) several
times and check if the front fork rebounds
smoothly.
4. Tighten:
• Front wheel axle pinch bolt “1”
Front wheel axle nut
105 N·m (10.5 kgf·m, 77 lb·ft)
1
T
R
.
.
Front wheel axle pinch bolt
21 N·m (2.1 kgf·m, 15 lb·ft)
T
R
.
.