Name: Yamato DX302
Brand: Yamato
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2. Before operating the unit

Precautions when installing the unit

1. Carefully select an installation site.

Take special care not to install the unit at a place described below:

・On uneven or dirty floor

・Where combustible gas or corrosive gas exists

・Where the ambient temperature is 35°C or more

・Where temperature fluctuates widely

・Where dust or humidity is excessive

・Where subject to direct sunlight

・Where vibration is severe

Install this unit at a place with spaces shown below.

15cm

Front

15cm or more

1m or

2. Never operate the unit in an atmosphere containing explosive or flammable gas

Never operate the unit in an atmosphere containing flammable or explosive gas. Since the

unit is not explosion-proof, an arc is discharged when turning a switch “ON” and “OFF” and

during operation and a fire or an explosion may result.

See the section “13. List of dangerous materials” on page 36 for flammable and explosive

gases.

Explosive gas

Combustible gas

Questions and Answers:

Need help?

Do you have a question about the Yamato DX302 and is the answer not in the manual?

Yamato DX302 Specifications

General