Yanmar SA424 User Manual

10-8
10. 3-POINT HITCH AND DRAWBAR
SA221/324/424 Operation Manual
■ 3-Point Hitch Kit Contents
Lower links and lift links each have two different
positions that can be used to change lift capacity and
height capacity. Tractor is shipped from factory with
lift link in upper position (a) and lower link in front
position (c). This position will provide maximum lift
height. Adjusting to lower hole on lift link (b) and rear
hole on lower link (d) will provide maximum lift
capacity. Adjust links as necessary for your
implement. Both left and right links are used in same
positions.
(A) Lift Link
(B) Lower Link
(a) Upper position on Lift Link
(b) Lower position on Lift Link
(c) Front position on Lower Link
(d) Rear position on Lower Link
Parts No. Name
Qty
Remarks
SA221 SA324/424
1A8330-71110 LINK ASSY 1 1 Top Link
1A8330-71120 PIN 1 1
Clevis Pin for
Top Link
1A8330-71130 PIN ASSY 3 3 Lynch Pin
1A8320-72100
LINK ASSY,
LIFT R
—1
Lift Link
(Right)
1A8330-72100
LINK ASSY,
LIFT R
1—
1A8330-72150 PIN 2 2 Clevis Pin
1A8330-72170 PIN, 16 2 2 Hairpin Clip
1A8320-72300
LINK ASSY,
LIFT L
—1
Lift Link
(Left)
1A8330-72300
LINK ASSY,
LIFT L
1—
1A8330-73120 SPACER 1 1 Spacer
1A8320-73500
LINK ASSY,
LOWER
— 2 Lower Link
1A8330-73500
LINK ASSY,
LOWER
2 — Lower Link
1A8330-74100
CHAIN KIT,
CHECK
2 2 Check Chain
1A8330-74160 PIN 2 2
Clevis Pin for
Check Chain
1A8330-74550
CHAIN
ASSY
11
Check Chain
Stay
22417-200300
PIN,
2.0 X 30
2 2 Cotter Pin
26736-160002 NUT 16 2 2
Nut for
Check Chain
22217-160000
WASHER
16
22
Washer for
Check Chain
2. Adjust Lift Capacity and
Height (SA324/424)
(A)
(B)
(a)
(b)
(c) (d)
10_3pointHitch.fm 8 ページ ２０１８年７月６日 金曜日 午前９時４７分

Yanmar SA424 Specifications

General

Brand	Yanmar
Model	SA424
Category	Tractor
Language	English