Yanmar SA424 User Manual

8-8
8. OPERATE THE TRACTOR
SA221/324/424 Operation Manual
2. Pull the parking brake lock holder forward to
release it then parking brake lock lever downward
to unlock the brake pedal.
(A) Parking brake lock lever
(B) Parking brake lock holder
(a) Pull forward: Parking brake lock holder is
released as indicated by arrow. Refer to figure.
(b) Downward: Unlock the brake pedal.
3. Release the brake pedal. Make sure that the
brake pedal is unlocked.
9. Depress slowly the forward and
reverse drive pedal
(A) Forward drive pedal
(B) Reverse drive pedal
■ Stop Procedure
1. Push down the Power Take Off (PTO) switch to
OFF position.
2. Slow down the engine.
3. Make sure that the forward and reverse drive
pedal is released completely.
4. Depress the brake pedal to stop the tractor.
5. Move the range shift lever to the N (neutral)
position. (SA324/424)
6. Push the 3-point hitch control lever forward to
lower any implements to the ground.
7. Engage the parking brake securely, for details,
see "6. Lock and Set the Parking Brake" on page
7-3.
8. Turn the starter key switch to OFF position.
IMPORTANT
●When the forward and reverse drive pedal is
released, the transmission will automatically
return to the N (neutral) position.
(A)
(B)
(b)
(a)
(A)
(B)
4. Stop the Tractor
Avoid injury!
●Slow down before making a turn.
●To prevent injury or property damage:
• always lock the parking brake when the
range shift lever is in the N (neutral) position
• whether the engine is running or stopped
• the tractor's wheels are free to move when
the range shift lever is in the N (neutral)
position
! WARNING
! WARNING
SA221_324_424_OperatorsManual.book 8 ページ ２０１８年６月４日 月曜日 午後５時１９分

Yanmar SA424 Specifications

General

Brand	Yanmar
Model	SA424
Category	Tractor
Language	English