Yardworks 054-5752-2 User Manual

model no. 054-5752-2 | contact us: 1.866.523.5218 model no. 054-5752-2 | contact us: 1.866.523.5218
19
ADJUSTING THE POLE EXTENSION
•Disconnect the pole saw from the power supply.
•Align top and bottom sections.
•Using a screwdriver, press on the locking tab.
•Slide the top section over the bottom one.
•When the desired length is achieved, rotate the collar counter-clockwise to secure.

NOTE: Extend the pole only to the length required to
reach the limb being cut. Do not extend the handle above
waist height.

NOTE: Adjust your hand placement on the shaft of the
pole saw to keep proper balance. Do not attempt to
use the pole saw at a length that does not allow you to
achieve proper footing and balance at all times.
!
!
Fig. 10
④
COLLAR
②
① ③
OperationOperation
Fig. 11

Yardworks 054-5752-2 Specifications

General

Brand	Yardworks
Model	054-5752-2
Category	Pole Saw
Language	English