model number 054-5757-2 | contact us: 1.866.523.5218
25
(9) Keep practicing on scrap logs in a secure working area until you get the hang of it and can
TBXXJUIFBTFVTJOHB«VJENPUJPOBOEBTUFBEZDVUUJOHSBUF
KICKBACK SAFETY DEVICES ON THIS SAW
This saw has a low-kickback chain and reduced kickback Guide Bar (9). Both items reduce the
chance of kickback. However, kickback can still occur with this saw.
The following steps will reduce the risk of kickback.
6TFCPUIIBOETUPHSJQTBXXIJMFTBXJTSVOOJOH6TFªSNHSJQ5IVNCTBOEªOHFSTNVTU
wrap around saw handles.
• Keep all safety items in place on saw. Make sure they work properly.
• Do not overreach or cut above shoulder height.
• Keep solid footing and balance at all times.
• Stand slightly to left side of saw. This keeps your body from being in direct line with chain.
• Do not let guide bar nose touch anything when chain is moving.
• Never try cutting through two logs at same time. Only cut one log at a time.
• Do not bury the guide bar nose or try plunge cut (boring into wood using guide bar nose).
• Watch for shifting of wood or other forces that may pinch chain.
• Use extreme caution when reentering a previous cut.
• Use only the low-kickback chain and Guide Bar (9) that were supplied with this chainsaw.
• Never use a dull or loose chain. Keep chain sharp with proper tension.
HOW TO USE SAW SAFELY
1. Use the chainsaw only with secure footing.
2. Hold the chainsaw at the right-hand side of your body. (See Fig. K)
3. The chain must be running at full speed before it makes contact with the wood.
4. Use the Bumper Spikes (8) to secure the saw onto the wood before starting to cut.
5. Use the bumper spikes as a leverage point while cutting. (See Fig. L)
6. Do not operate the chainsaw with arms fully extended, attempt to saw areas which are
EJGªDVMUUPSFBDIPSTUBOEPOBMBEEFSXIJMFTBXJOHSee Fig. M)
NOTE: Never use the chainsaw above shoulder height.
Assembly
To Next Page
Loading...
Need help?
General
