model number 054-5757-2 | contact us: 1.866.523.5218
33
TROUBLESHOOTING TABLE
The following table gives checks and actions that you can perform if your machine does not
operate correctly. If these do not identify/remedy the problem, contact your service agent.
WARNING: Switch off and remove plug from power source before investigating fault.
SYMPTOM POSSIBLE CAUSE REMEDY
Chainsaw fails to operate
No power
Mains socket faulty
Extension cord damaged
Check power
Use another socket
Check cord; replace
Chainsaw operates
intermittently
Extension cord damaged
Loose connection
Internal wiring defective
On/Off defective
Check cord; replace
Contact service agent
Contact service agent
Contact service agent
Dry chain
No oil in reservoir
7FOUJOPJMªMMFSDBQDMPHHFE
Oil passage clogged
3FªMMPJM
Clean cap
Clean oil passage outlet
Chain/chain bar
overheats
No oil in reservoir
7FOUJOPJMªMUFSDMPHHFE
Oil passage clogged
Chain is over tensioned
Dull chain
3FªMMPJM
Clean cap
Clean oil passage outlet
"EKVTUMPDLJOHLOPC
Sharpen chain or replace
Chainsaw rips,
vibrates, does not saw
properly
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the
wrong direction
"EKVTUMPDLJOHLOPC
Sharpen chain or replace
Replace chain
Reassemble with chain in
correct direction
Troubleshooting