| Using the Speakerphone | 11
Procedure
Hold the Answer Call button for 3 seconds.
The three-way conference for the mixed channel is successfully established.
Handling Multiple Calls
Procedure
You can do the following:
•
Tap the Answer Call button to put the current call on hold and answer the incoming call.
•
Tap the Answer Call button to switch between held call and active call.
•
Tap the End Call button to reject the incoming call and keep the current call.
Volume Adjustment and Synchronization
Procedure
Tap the Volume Up/Volume Down button / .
Note: The volume will be synchronized between the speakerphone and the connected device. It is
limited by the connected device.
Using Teams /Voice Assistant Button
If connected via USB cable or Bluetooth, you can use this button.
When used with the Teams client, the button LED indicator is as follows. When the voice assistant is
activated, the button always glows white.
LED indicator
LED Indicator Description
Slow-flashing white When there are missed calls/voice mails/Teams meeting
notification
Solid white
Teams connected
Off
Teams disconnected
• Invoking the Teams Client
• Activating Voice Assistant
Invoking the Teams Client
Procedure
After the Teams client connects, tap the Teams button .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
