| Software | 12
Note: Before using the Teams button functions, you should install the Microsoft Teams client on
your PC. It works in the USB cable or BT50 connection.
Activating Voice Assistant
You can activate your smartphone’s voice assistant (Siri
®
, Google Now
™
, Cortana
™
).
Procedure
Hold the button for 2 seconds.
Note: It depends on support from your connected smartphone.
Pausing or Playing the Music
Before you begin
You have connected the speakerphone to a smartphone, and the smartphone is playing the music.
Procedure
1.
Tap the End Call button to pause the music.
2.
Tap again to resume the music.
Note: If you have connected the speakerphone to PC and smartphone via Bluetooth and both
are playing music, tap to switch to another channel instead of pausing the music.
Resetting to Factory
You can reset the speakerphone to factory settings when the speakerphone is idle. After a factory reset, all
personalized settings are cleared.
Procedure
Hold the Answer Call button and the End Call button for 6 seconds.
"Factory reset" is announced by the speakerphone.
Note: The Bluetooth pairing information will be cleared after a factory reset. It is necessary to re-
pair the speakerphone with your Bluetooth devices or BT50.
Related information
Connecting to PC/Smartphone via Bluetooth
Software
• Yealink USB Connect
• Upgrading the Speakerphone
• Upgrading the BT50
To Next Page
Loading...
Need help?
General
Weight and Dimensions
