Yealink CP700 User Manual

| Getting Started | 5
Getting Started
• Powering on the Speakerphone
• Powering off the Speakerphone
• Charging the Speakerphone
• Checking the Battery Status
Powering on the Speakerphone
Procedure
Do one of the following:
• Plug the speakerphone into a USB power source using the attached USB cable.
•
Hold the Power button for 3 seconds.
Powering off the Speakerphone
Procedure
Hold the Power button for 3 seconds.
Note: To preserve battery while unplugged, the speakerphone will automatically power off after 30
minutes of inactivity.
Charging the Speakerphone
Plug the speakerphone into a USB power source.
The CP700 battery lasts for up to 9 hours of talk time and takes approximately 3 hours (5V/500mA) to fully
charge.
The CP900 battery lasts for up to 12 hours of talk time and takes approximately 3 hours (5V/1A) to fully
charge.

Yealink CP700 Specifications

General

Auto	No
Device type	Universal
Certification	FCC, CE, RoHS
Product color	Black, Grey
Noise reduction	Yes
Maximum operating distance	1.5 m
Signal-to-Noise Ratio (SNR)	58 dB
Current	1.4 A
Standby time	5520 h
Battery capacity	1420 mAh
Charging voltage	5 V
Power source type	Battery
Battery recharge time	3 h
Package depth	142 mm
Package width	158 mm
Package height	53 mm
Package weight	3600 g
Quantity	1
Sensitivity	81 dB
Output power	5 W
Microphone frequency	100 - 8000 Hz
Number of microphones	2
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Width	120 mm
Height	28 mm
Weight	220 g