User Guide for the SIP-T21(P) E2 IP Phone
102
The SIP-T21(P) E2 IP phone supports up to 3 parties (including yourself) in a conference
call. This is the default method of conference called Local Conference.
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and then press , , or the Send soft
key.
4. When the second party answers the call, press the Conf soft key again to join all
parties in the conference.
You can press or to see all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press or to select the call for conference and ensure that the call is active
(for example, select the call on account 1).
3. Press the Conf soft key to join the two calls in the conference on the selected
account.
During the conference call, you can do the following actions:
- Press the Hold soft key to place the conference on hold.
- Press the Split soft key to split the conference call into two individual calls on hold.
- Press the Manage soft key, and then press or to select the desired party:
Press the FarMute soft key to mute the party. The muted party can hear
everyone, but no one can hear the muted party.
Press the Remove soft key to remove the party from the conference call.
Press the New Call soft key to place a new call.
Press the Back soft key to return to the previous screen.
- Press to mute the conference call, all other participants can hear each other,
To Next Page
Need help?
General