User Guide for the SIP-T21(P) E2 IP Phone
114
phone will place a call to the monitored user instead of picking up the incoming
call of the monitored user when you press the BLF List key.
When there is a conversation on the monitored user, press the BLF list key to barge
in and set up a conference call. Before barging in an active call, ensure that the
BLF List Barge In Code has been configured in advance. If the code is not
configured, the phone will place a call to the monitored user instead of barging in
an active call of the monitored user when you press the BLF List key.
When a call is being parked against the monitored phone, press the BLF List key to
retrieve the parked call from the monitored user. Before retrieving the parked call,
ensure that the BLF List Retrieve Call Parked Code has been configured in advance.
If the code is not configured, the phone will place a call to the monitored user
instead of retrieving the parked call when you press the BLF List key.
To configure BLF List settings via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the BLF List URI in the BLF List URI field.
4. (Optional.) Enter the directed pickup code in the BLF List Pickup Code field.
5. (Optional.) Enter the barge-in code in the BLF List Barge In Code field.
6. (Optional.) Enter the call park retrieve code in the BLF List Retrieve Call Parked
Code field.
7. Click Confirm to accept the change.
Note
To Next Page
Loading...
Need help?
General