User Guide for the SIP-T21(P) E2 IP Phone
40
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 35),
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press or , or the Switch soft key to select the desired account from the
Account field.
If Auto is selected, the phone will use the default account when placing calls to the
contact from the local directory.
6. Press or , or the Switch soft key to select the desired ring tone from the
Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group
ring tone (refer to Adding Groups) >Account ring tone (refer to Ring Tones)>Phone
ring tone (refer to Ring Tones).
7. Press or , or the Switch soft key to select the desired group from the Group
field.
8. Press the Add soft key to accept the change or the Back soft key to cancel.
Note
To Next Page
Loading...
Need help?
General