Basic Call Features
123
Configuring the Forward Modes
There are two call forward modes:
Phone (default): Call forward is effective for the phone system. You can apply call forward
to all line registrations on the phone.
Custom: Call forward can be configured for each or all accounts. You can specify individual
or all registrations on a phone that has multiple registered lines.
Procedure:
1. Click Features->Forward&DND.
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm.
Phone Mode
Activating Call Forward in Phone Mode
Procedure:
1. Navigate to Menu->Features->Call Forward, and then select a desired forwarding type.
2. Select Enabled from the Always Forward/Busy Forward/No Answer Forward field.
3. Enter the destination number you want to forward incoming calls to in the Forward to field.
4. If you select the No Answer Forward option, select the desired ring time to wait before
forwarding from the After Ring Time field.
5. (Optional.) Enter the always/busy/no answer forward on code or off code respectively in the
On Code or Off Code field.
If the forward on code or off code is configured, the IP phone sends the corresponding
To Next Page
Loading...
Need help?
General
Weight and Dimensions
