User Guide for T5 Series IP Phones
62
Adding Contacts Manually
Procedure:
1. Press Directory or navigate to Menu->Directory->Local Directory to enter the local
directory.
2. Enter the desired contact group.
If the contact you want to add doesn’t belong to any group, enter the All Contacts.
3. Press Add.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Select the desired account from the Account field.
If Auto is selected, the phone will use the default account when placing calls to the contact
from the local directory.
6. Select the desired ring tone from the Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group ring
tone (refer to Adding Groups) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones).
7. Highlight the Photo field, and then press Enter.
8. Select a desired photo from the Photo field.
9. Press Save.
If the contact already exists in the local directory, the LCD screen will prompt “Contact name
existed?”.
Adding contacts is configurable via web user interface at the path Directory->Local Directory.
For more information on how to add a contact from history/remote phone book, refer to
Adding a Contact to the Local Directory/Blacklist/Adding a Contact to the Local
Directory/Blacklist.
Editing Contacts
Procedure:
1. Press Directory or navigate to Menu->Directory->Local Directory to enter the local
directory.
2. Enter the desired contact group.
To Next Page
Need help?
General
Weight and Dimensions
