User Guide for T5 Series IP Phones
86
different statuses. This feature is disabled by default.
The following table lists the page icons to indicate different statuses:
Fast-flashing: the BLF monitored user receives an incoming call
on the non-current page.
Solid: there is a parked call on the non-current page.
Fast-flashing: the line receives an incoming call on the
non-current page.
For more information on the page switch key LED status, refer to LED Instructions.
Procedure:
1. Click Dsskey->Line Key.
2. Select Enabled from the pull-down list of Enable Page Tips.
3. Click Confirm to accept the change.
Linekey Length in Short
For the SIP-T52S IP phone, you can specify labels for some key features, which is displayed on
the idle LCD screen. The length of the label displays in short when the phone places a call,
receives a call, is during a call, or is idle (if large DND icon is enabled). You can configure the
phone to display 2 characters or nothing via linekey length in short feature.
If you configure the phone to display 2 characters, the display will match the rules below:
Configured
(for example,
aLine1)
“Short Label” has higher priority than “Label”.
If the value of “Short Label” is configured, the
value of “Label” is ignored.
Display the first two characters of the short
label (for example, aL).