Yealink Telkom T21P E2 User Manual

2. Connect the handset and optional headset, as shown below:
3. Connect the network and power, as shown below :
The headset should be purchased separately.
Note:
You have two options for network and power connections. Your system
administrator will advise you which one to use.
The hookswitch tab has a lip which allows the handset to stay on-hook
when the IP phone is mounted vertically.
Note:
AC Power Option
A
B
PC Connection
(Optional)
Power Adapter
(DC 5V)
PoE (Power over
Ethernet) Option
PC Connection
(Optional)
IEEE 802.3af compliant
PoE Hub/Switch
PC
PC
Call History
1. Press the History soft key when the phone is idle, press or to scroll through
the list.
Select Detail to view detailed information about the entry.
2. Select an entry from the list, you can do the following:
• Press the Send soft key to call the entry.
• Press the Delete soft key to delete the entry from the list.
Customising Your Phone
If you press the Option soft key, you can also do the following:
Select Add to Contact to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Delete All to delete all entries from the list.
You can split the conference call into two individual calls by pressing the
Split soft key.
Note:
Message waiting indicator on the idle screen indicates that one or more voice
messages are waiting at the message centre. The power indicator LED slowly flashes
red and the MESSAGE key LED lights up.
Voice Message
To listen to voice messages:
1. Press or the Connect soft key.
2. Follow the voice prompts to listen to your voice messages.
For other advanced call features, please view supported calling features here
www.nology.co.za/telkom-calling-features or scan the below QR code:
9 2

Yealink Telkom T21P E2 Specifications

General

Brand	Yealink
Model	Telkom T21P E2
Category	IP Phone
Language	English