YESKAMO Z6 - Share the Camera with Family

V. Share the Camera with Family
1. Sign up new account
Camera send notifications when motion detected, but
save recording only when equipped with storage
capacity. Please insert MicroSD card or purchase
cloud service on App to save the video.
NOTE:
1. Configuration is finished, the camera in standby status when
not watching video or no motion detected and the indicator
off.
2. If need switch WiFi network, require to reset the camera and
re-setup. If you reset the camera after setup, the camera will
disconnect with network.
3. The camera support setup on one phone only, need reset to
setup to another phone. It allows share the device on the
default mobile phone to others. Refer the following " V.
Share the Camera with Family" for detail instructions.
Download Cloudedge App on family’s phone, sign up and
login with new account.
(Follow the instruction of previous ''IV. Configuration on
Phone App > 2. Create account and login'' )
2. Add as friends
2.1 On default phone APP "Friends" interface, enter App
account e-mail or mobile number of the family’s phone, tap
"Add" .
Step 6.
-13-
YESKAMO