VIII. Installation
1. Camera Surveillance Area
Adjust Volume from Settings >> Basic Function >> Speaker
Volume, default volume at 70
When installing the camera, the PIR sensor should not be
vertically aligned with the moving objects, as it may not
sensitive to movement. It is recommended that the camera be
tilted more than 10 degrees to capture motions.
2. Camera Installation
1.1 Full charge camera before installation. It takes 4Hours to
get full charged with 5V 2A Charger(Not included).
1.2 Use the electric drill to drill holes in the wall, fix the
bracket base with screws.
1.3 Then rotate the bracket wing clockwise to install the
camera. And rotate the bracket wing counterclockwise to
remove the camera when necessary.
4.2 Volume Control
-24-
To Next Page
Loading...
Need help?
General
