YOKOGAWA DY100 User Manual

4-7
IM 01F06A00-01E
4. BASIC OPERATING PROCEDURES
4.4.2 Method of Parameter Setting
■ Input method of numeric data
Example 1: Change the span from 100m
3
/h to 150m
3
/h
The setting mode can be changed referring 5.3 parameter list
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
SET
INCSHIFT
F040402.EPS
Press “ SET ” key.
Press “ SET ” key.
Press “ SHIFT ” key any time.
Press “ INC ” key any time.
Press “ SET ” key.
Press “ SET ” key.
Press “ SET ” and “ SHIFT ” key.
Indication of % flow
rate.
Enter to the setting
mode.
(Span number is
“ B10 ”)
Enter to data number
item.
Move the position to
input the data.
Set “ 5 ” and indicate
“ 150m
3
/h ”.
Ensure the setting
data.
Complete the Setting.
Return to display
mode.
IMPORTANT
After setting a parameter, keep the power on for at
least 30 seconds.
If the power of flowmeter is turned off, a parameter
setting is released.

YOKOGAWA DY100 Specifications

General

Brand	YOKOGAWA
Model	DY100
Category	Measuring Instruments
Language	English