EasyManuals Logo
Home>YOKOGAWA>Industrial Equipment>ProSafe-RS

YOKOGAWA ProSafe-RS User Manual

YOKOGAWA ProSafe-RS
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
iv
TI 32P01J10-01EN
Cautions for Safely Applying the Device
Wiring Power Cable
WARNING
Connect the power cables according to the procedure in this document.
Power cables must conform to the safety standards of the country where the device is installed.
SEE
ALSO
For Wiring Power Cable, refer to 3.2, “Connecting Power.”
Earth Wiring
WARNING
This equipment requires a protective grounding dened by the safety standard.
Ground the device following the procedure in this document to prevent from electric shock and to
minimize the noise.
SEE
ALSO
For Earth Wiring, refer to 3.3, “Connecting Ground Cable.”
Tightening Torque of Screws
IMPORTANT
The tightening torque that the Product recommends is showed in the following table. However,
if the tightening torque of the screw is specied in the User’s Manuals, follow the instructions
described in the User’s Manuals.
Table Table of Recommended Tightening Torque
Nominal diameter of a screw M2.6 M3 M3.5 M4 M5 M6 M8 M10
Recommended tightening torque
(N•m)
0.35 0.6 0.8 1.2 2.8 3.0 12.0 24.0
Oct. 25, 2016-00

Other manuals for YOKOGAWA ProSafe-RS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA ProSafe-RS and is the answer not in the manual?

YOKOGAWA ProSafe-RS Specifications

General IconGeneral
BrandYOKOGAWA
ModelProSafe-RS
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals