To Next Page

To Previous Page

14 - 2 DS3408 Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Miscellaneous Scanner Parameter Defaults

Table 14-1 lists the defaults for miscellaneous scanner options parameters. To change the default values scan the

appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the

default parameter values, scan the *Set Defaults bar code on page 4-4.

NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and

miscellaneous default parameters.

Table 14-1

Miscellaneous Scanner Options Default Table

Parameter

Number

Default

Page

Number

Transmit Code ID Character 2Dh None

14-3

Prefix Value 63h, 69h 7013 <CR><LF>

14-4

Suffix 1 Value

Suffix 2 Value

62h, 68h

64h, 6Ah

7013 <CR><LF>

14-4

Scan Data Transmission Format EBh Data as is

14-5

FN1 Substitution Values 67h, 6Dh Set

14-7

Transmit “No Read” Message 5Eh Disable

14-8

Synapse Interface F0h ACh Standard

14-9

Zebra DS4308 Reference Guide

Other manuals for Zebra DS4308