4 - 14 DS3408 Product Reference Guide
Beep After Good Decode
Parameter # 38h
Scan a bar code below to select whether or not the digital scanner beeps after a good decode. If you select Do Not
Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate error
conditions.
Fuzzy 1D Processing
Parameter # F1h 02h
This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and poor
quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in detecting a no
decode.
*Beep After Good Decode
(Enable)
(01h)
Do Not Beep After Good Decode
(Disable)
(00h)
*Enable Fuzzy 1D Processing
(01h)
Disable Fuzzy 1D Processing
(00h)
To Next Page
Loading...
Need help?
General
