Zebra DS4308 Reference Guide

Advanced Data Formatting 15 - 31
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 15-2 Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan Move Cursor To Character , then any printable ASCII
character from the
Alphanumeric Keyboard . This moves the cursor
to the position after the matching character. If the character is not
there, the rule fails and ADF tries the next rule.
15-33
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 15-33
Move Cursor Past a Character This parameter moves the cursor past all sequential occurrences of
a selected character. For example, if the selected character is ‘A’,
then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan
Move Cursor
Past Character
, then select a character from the Alphanumeric
Keyboard
. If the character is not there, the cursor does not move
(i.e., has no effect).
15-33
Move Cursor Past a Specific
String
This action moves the cursor past the first occurrence of a selected
string. Scan
Move Cursor Past Specific String , then select the
character(s) (up to 10) using the
Alphanumeric Keyboard . Scan the
End of Message bar code on page 15-102 .
15-33
Move Cursor to Specific String
and Replace
This action moves the cursor to the first occurrence of a selected
string and replaces the string with another user-defined string. Scan
Move Cursor to Specific String and Replace , then enter an
alphanumeric string representing the character(s) (up to 10) to
match and delete using the
Alphanumeric Keyboard . Scan the End
of Message
. Enter another alphanumeric string representing the
character(s) (up to 10) to insert using the
Alphanumeric Keyboard .
Scan
End of Message .
15-33

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English