User Preferences 4 - 11
Trigger Mode
Parameter # 8Ah
Select one of the following trigger modes for the digital scanner:
•
Level - A trigger pull activates decode processing. Decode processing continues until the bar code is
decoded, you release the trigger, or the Decode Session Timeout occurs.
•
Blink - In presentation (scanstand) mode, the digital scanner activates decode processing when it detects a
bar code in its field of view. Decoding range is reduced in this mode.
•
Host - A host command issues the triggering signal. The digital scanner interprets an actual trigger pull as a
Level triggering option
.
Level
(00h)
Blink
(07h)
*Auto Aim
(09h)
To Next Page
Loading...
Need help?
General
