Revision Date – 15/07/2020 page 39
9.6 Main circuit board - Replace
Disconnect all power leads from the back of the
fridge.
Remove the front cover as described in Section
9.3.
It is not necessary to remove all circuit boards as
described in Section 9.3.
Locate the main circuit board and disconnect all
connectors from the main circuit board.
Remove the four retaining screws securing the
main circuit board to the front cover.
The main circuit board can now be removed from
the fridge.
Installation is the reverse procedure.
Refit the rear cover.
Restore power to fridge and check for correct
operation.
CAUTION: Ensure that all cables are securely
fastened away from sharp, moving or hot
surfaces.
To Next Page
Loading...
Need help?
General