Zero ARB Service Manual

Revision Date – 15/07/2020 page 43
9.8 AC Rectifier - Replace
Remove the compressor base plate as described
in Section 9.7.
Pull out the AC Rectifier assembly to gain access
to the assembly.
Remove the plastic cover by unscrewing the four
retaining screws.
Remove the AC Rectifier PCB from the plastic
housing by unscrewing the four retaining screws.
Remove junction box plastic cover by removing
the retaining screws.

Zero ARB Specifications

General

Brand	Zero
Model	ARB
Category	Freezer
Language	English