5
Battery and Charging
WEEBILL 3 adopts built-in battery. When using WEEBILL 3 for the first time, please
activate the gimbal by fully charging the battery to ensure the proper function of
the gimbal.
Charging method: Use provided USB Type-C cable to connect the USB charger
(not included in the package) to charge WEEBILL 3. It is recommended to use USB
chargers that meet the PD protocol. (support 21.6W at most).
Battery and Charging
AC Power
（100-240V）
USB Charger
USB Type-C Cable
The gimbal is equipped with high-energy-density battery, which may cause
fire, economic loss, or personal injury when not properly used and stored.
Please read the disclaimer and warning herein as well as the description on
the battery label carefully before using the battery.
Please power off WEEBILL 3 to charge.
To Next Page
Loading...
Need help?
General
