Zline DW-WM-18 User Manual

11
Step 4: Check the Electrical Requirements and Cautions
The electrical requirements for the dishwasher are as follows:
In the United States, install in accordance with the National Electric Code/State and
Municipal codes and/or local codes.
For cable direct connections.
Use flexible, armored or non-metallic sheathed, copper wire with a
grounding wire that meets the wiring requirements for your local codes and
ordinances.
Use the strain relief method provided with the wiring junction box or install
a U.L.-listed/CSA-certified clamp connector to the wiring junction box. If
using conduit, use a U.L.-listed/CSA-certified conduit connector.
installing the dishwasher

Zline DW-WM-18 Specifications

General

Style	built-in dishwashers
Color	white matte, matte white
Load Capacity	16
Number of Cycles	6
Options/Settings	energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option
Drying Type	heated drying
Noise level	40 decibels adjusted
Control Type	touchpad
Delay Start	yes
Number of Racks	2
Sanitize Settings	no
Annual Energy Consumption	234 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	23 inches
Height	32 1/2 inches
Width	17 3/4 inches
Net Weight	73.7 pounds