Zline DW-WM-18 User Manual

39
Filling the Rinse Aid Dispenser
Filling the Detergent Dispenser
1. Open the detergent dispenser cap by pushing the detergent
dispenser release catch.
The flap is always open at the end of a dishwashing cycle.
2. Add the recommended amount of detergent to the main wash
detergent compartment.
3. Close the flap and then press it down.
Filling the Rinse Aid Reservoir
Your dishwasher has been designed to use liquid rinse aid only.
Using a powdered rinse aid will clog the reservoir opening and cause
the dishwasher to malfunction.
Rinse aid improves the drying performance of the dishwasher.
1. Remove the rinse aid reservoir cap by rotating it
counterclockwise.
2. Fill the rinse aid reservoir with rinse aid.
Use the viewing port when filling the rinse
aid reservoir.
3. Add the rinse aid if the LED screen shows "LSb".
4. Close the rinse aid reservoir cap by rotating it
clockwise.
Your dishwasher is designed to use a liquid rinse aid.
The use of rinse greatly improves drying performance after the
final rinse. Do not use a solid or bar-type rinse aid. Under normal
conditions, the rinse aid will last approximately one month. It is best
to keep it full, but do not over fill.
Do not add regular detergent to the rinse aid reservoir.
Do not fill the reservoir above the full level indicator. Excess rinse aid
can overflow during the wash cycle.
Preparing and Loading Dishes
WARNING
WARNING

Zline DW-WM-18 Specifications

General

Style	built-in dishwashers
Color	white matte, matte white
Load Capacity	16
Number of Cycles	6
Options/Settings	energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option
Drying Type	heated drying
Noise level	40 decibels adjusted
Control Type	touchpad
Delay Start	yes
Number of Racks	2
Sanitize Settings	no
Annual Energy Consumption	234 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	23 inches
Height	32 1/2 inches
Width	17 3/4 inches
Net Weight	73.7 pounds