Zline DW-WM-18 User Manual

13
Step 5: Unpacking and Inspecting the Dishwasher Continued
Plumbing Inspection
1. Check the hot water connection on the front left side of the base of the dishwasher.
The mounting plate should be secured to the front of the base, the threads inside
the connection should be smooth and shiny, and the area should be clean and
free of any debris.
2. Check the plastic brake and sensor cases to ensure these assemblies are not
cracked and that all connections are secure.
3. Check the drain hose for any holes or deformities that could allow a water leak
during draining.
Electrical Inspection
1. Confirm the junction box cover is secured to the junction box on the front right side
of the base of the dishwasher.
2. Confirm the electrical box was not damaged during shipping and that it is secured
to the base of the dishwasher.
Appearance Inspection
1. Confirm there are no dents or scratches on the front of the dishwasher
2. Check the edges of the doors for any roughness or cracking
3. Check the control panel to ensure it is clear and unscratched, and that all the
control markers are in their proper places.
Parts Inspection
1. Confirm you have all the parts listed in step 1.
installing the dishwasher

Zline DW-WM-18 Specifications

General

Style	built-in dishwashers
Color	white matte, matte white
Load Capacity	16
Number of Cycles	6
Options/Settings	energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option
Drying Type	heated drying
Noise level	40 decibels adjusted
Control Type	touchpad
Delay Start	yes
Number of Racks	2
Sanitize Settings	no
Annual Energy Consumption	234 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	23 inches
Height	32 1/2 inches
Width	17 3/4 inches
Net Weight	73.7 pounds