Zline DW-WM-18 User Manual

33
3. Delay
To delay the start of a selected cycle, press the delay start pad until the desired delay
time shows in the LED display. You can delay the start for 1 to 24 hours. To cancel the
delay start option before the delay period is over, press the start/cancel pad for 3-5
seconds.
4. Dispay Window
This displays the remained hours and minutes of the running cycle, delay
hours, and error codes etc.
5. Status Indicators
R - Rinse detergent needs to be refilled.
P - Program end.
N- Water failure, faucet is not open.
6. Options
H - Heating Dry
When the heating dry function is selected, the heater will work during
the dry process.
S - Sanitize
When the sanitize function is selected, the temperature of water will
be maintained at 156.2°F max. The max temperature may
not be reached if the incoming water temperature is not correct. Certified
residential dishwashers are not intended for licensed food establishments.
H - Hi Temp
When the hi temp wash function is selected, the temperature of the
water will be maintained at 140°F max.
Operating Instructions
Note:
The sanitize option is available with
heavy, normal, and ECO cycles.
Note:
The hi temp option is available with heavy, normal, ECO, and glass
cycles.

Zline DW-WM-18 Specifications

General

Style	built-in dishwashers
Color	white matte, matte white
Load Capacity	16
Number of Cycles	6
Options/Settings	energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option
Drying Type	heated drying
Noise level	40 decibels adjusted
Control Type	touchpad
Delay Start	yes
Number of Racks	2
Sanitize Settings	no
Annual Energy Consumption	234 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	23 inches
Height	32 1/2 inches
Width	17 3/4 inches
Net Weight	73.7 pounds