Reset the Mobile Hotspot
You can reset the mobile hotspot to the factory setting on the
mobile hotspot or the AT&T Wi-Fi Manager home page. (This
is useful if you have lost your Admin Login for the AT&T Wi-Fi
Manager home page.)
Notes:
• If you reset the modem to factory settings, all of your
customizations will be lost. If you want to keep them, save
them before doing the reset, then restore them afterward.
• When you reset the mobile hotspot, any currently connected
devices will lose access and will have to be reconnected after
the mobile hotspot restarts.
On the mobile hotspot:
From the home screen, tap Settings.
Tap Factory Reset.
Tap Reset device > OK.
On the AT&T Wi-Fi Manager home page:
On the home page, click Settings on the navigation menu on
the left side.
Click Advanced > Device Reset tab.
Click Reset.
Click Yes.
After the device has reset, reconnect Wi-Fi devices.
43Advanced SettingsUse Your Mobile Hotspot42
Advanced Settings
This chapter provides information on how to configure
advanced settings for various aspects of the device such as
Wi-Fi settings, WAN settings, router settings, etc.
Manage Wi-Fi
Set Wi-Fi Network Options
To configure the Wi-Fi network options:
On the AT&T Wi-Fi Manager home page, log in as
Administrator.
Click Settings on the navigation menu on the left side.
Click Wi-Fi > Advanced Settings tab.
For the Main Wi-Fi and Guest Wi-Fi networks, select the
desired options.
• Band Selection — The Wi-Fi band range used for the
selected network. 2.4 GHz uses less power and is longer
ranged than 5 GHz, but 5 GHz can provide higher speeds
with less interference.
• Network Mode — The WLAN protocol being used. The
recommended value depends on the band range selected:
• 2.4 GHz — 802.11 b/g/n or 5 GHz — 802.11 a/n
• Channel Bandwidth — Choose 20Mhz or 20MHz/40MHz.
• Country/Region Code — Select a country from the drop-
down menu.
AT&T Velocity – User Guide – Postpaid AT&T Velocity – User Guide – Postpaid
To Next Page
Loading...
Need help?
General
