22
WARNING!
Encryption is irreversible. The only way to revert to an unencrypted phone is to
perform a factory data reset which erases all your data.
Encryption provides additional protection in case your phone is stolen and may be
required or recommended in some organizations. Consult your system
administrator before turning it on. In many cases the PIN or password you set for
encryption is controlled by the system administrator.
Before turning on encryption, prepare as follows:
x Set a lock screen pattern, PIN, or password.
x Charge the battery.
x Keep the phone connected to the charger.
x Schedule an hour or more for the encryption process. You must not interrupt it
or you will lose some or all of your data.
When you're ready to turn on encryption:
1. Touch the Home key > > Settings > Security > Encrypt phone.
2. Touch ENCRYPT PHONE.
The ENCRYPT PHONE button is dimmed if your battery is not charged or your
phone is not plugged in.
If you change your mind about encrypting your phone, touch the Back Key.
WARNING!
If you interrupt the encryption process, you will lose data.
Read the information about encryption carefully.
3. Draw the lock screen pattern, or enter your lock screen PIN or password and
touch NEXT.
4. Touch ENCRYPT PHONE.
To Next Page
Loading...
Need help?
General
