Zte Blade A72 5G User Manual

41
Using Your Fingerprint
With the fingerprint sensor on the Power key of your phone, you
can register up to 5 fingerprints and use them to unlock the
phone or open a bound app when the screen is off or locked. You
can also use the touch-controlled function.
NOTES:
 The fingerprint feature is usable only when a screen lock
(Pattern, PIN, or Complex password) is enabled. When the
screen lock is reset to None or Swipe, all registered
fingerprints are erased.
 If you restart your phone, you need to enter the screen lock
pattern, PIN or password you set to unlock the screen for the
first time.
Register a Fingerprint
1. Open Settings and touch Security > Fingerprint >
Fingerprint management.
2. Enter the screen lock pattern, PIN or password you set. If you
haven’t set a screen lock, follow the prompts to set it.
3. Touch REGISTER or Add fingerprint.
4. Follow the prompts to record the center and the edges of a
finger.
5. Touch OK.
NOTE:
Touch an existing fingerprint record to rename or delete it.

Zte Blade A72 5G Specifications

General

Display Size	6.52 inches
Display Type	IPS LCD
Resolution	720 x 1600 pixels
Processor	MediaTek Dimensity 700
RAM	4 GB
Internal Storage	64 GB
Expandable Storage	microSDXC
Rear Camera	13 MP + 2 MP + 2 MP
Front Camera	5 MP
Battery Capacity	4000 mAh
Battery Type	Li-Ion
Operating System	Android 11
Network	5G
SIM	Dual SIM (Nano-SIM, dual stand-by)
Bluetooth	5.1
USB	USB Type-C 2.0
Sensors	Fingerprint (side-mounted), accelerometer, proximity
Colors	Blue