EasyManuals Logo
Home>Zte>Network Hardware>EPON SFU Series

Zte EPON SFU Series User Manual

Zte EPON SFU Series
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Support bidirectional FEC, supports the RS (255, 239) FEC decoding
Supports default SFU (pure bridged data) access
Support PPPoE, DHCP, static IP broadband service access
Support NAT, static routing, port forwarding
Support data encryption, VLAN transparent, vlan tag, vlan trunk
Support up and down traffic limit function
Supports port loop detection / port link status detection / power dying gasp alarm
Support OLT remote upgrade / WEB local upgrade function
Supports broadcast storm suppression
Support port isolate between different port.
Support port flow control
Support managed by different manufacturers OLT work as SNMP-agent. Easy to
install and maintain
Provide a variety of fault alarm function, easy to fault diagnosis
Support AES-128 decryption, support key generation and switching
Support DBA technology and priority Dual management model to ensure minimum
bandwidth requirements for users
Support CATV service remote shutdown function
Working wavelength: 1100 - 1650nm
Optical reflection loss:> 45dB
Input optical power: -18dBm ~ 0dBm
2.2 Environmental Requirements
Operation temperature-0°C50°C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zte EPON SFU Series and is the answer not in the manual?

Zte EPON SFU Series Specifications

General IconGeneral
BrandZte
ModelEPON SFU Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals