4 Configure the Internet
Parameter Description
In this case, default value is 1500.
Link Type There are two link types: PPP and IP.
PPP Transfer Type In this case, default value is PPPoE.
PPP
Username/Password
PPPoE user name and password.
They are provided by the ISP.
IP Version
The IP version includes: IPv4 and IPv6 IPv4/v6
In this case, IPv4 is selected.
IPv4
IP Type
By default, it is set to DHCP. Options:
DHCP: The DHCP server automatically allocates a dynamic
IP address to the device.
Static: You need to specify a static IP address for the device.
IP Address IP Address of H3140.
Subnet Mask Subnet mask of H3140.
Gateway It is usually the IP address of the H3140 by default.
DNS1-DNS3
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
NAT Enable or disable the NAT function.
IPv6
IPv6 Info Acquire Mode
Specifies how to acquire IPv6 information for the WAN connec-
tion. It is valid only if the WAN connection supports IPv6.
The options are:
Manual :You need to set the global address, gateway, and
DNS acquisition modes.
Auto :The global address, gateway, and DNS acquisition
modes are automatically configured.
Request PD By default, the On button is selected.
Unnumbered Mode By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
GUA Allowed From Specifies how to acquire the global IPv6 address. It is valid on-
ly when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:
SJ-20210621164956-009 | 2021-12-07(R1.0) 19
To Next Page
Loading...
Need help?
General
