Zte H3140 User Manual

5 Configure the Local Network
9. Click Apply button to apply the changes.
5.4.2 Configure the Routing (IPv6)
Abstract
The section describes how to configure Routing (IPv6).
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Prerequisite
Before configuring routing (IPv6), make sure that the IPv6 WAN connection is created.
Steps
Configure Routing Table
1. On the main page of the H3140, select Local Network > Routing > IPv6 to the
Routing (IPv6) page.
2. Click Routing Table to the configuration page, see Figure 5-21.
Figure 5-21 Routing Table Page
3. Click Refresh to refresh the information.
Configure Static Routing
4. Click Static Routing to the configuration page and then click the Create New Item,
see Figure 5-22.
SJ-20210621164956-009 | 2021-12-07(R1.0) 59

Zte H3140 Specifications

General

Brand	Zte
Model	H3140
Category	Gateway
Language	English